View AZ770-1A-12D_4633951.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ770 AZ
SPDT SUBMINIATURE POWER RELAY
FEATURES * * * * * * * Small footprint 5 kV dielectric strength, 10 kV surge Class B insulation standard 8 mm creepage and clearance Epoxy sealed version available 5 Amp switching High temperature 105 C and high current 10A version avilable ( UL Pending ) * UL, CUR file E44211, VDE 40006815 CONTACTS
Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W (SPST-NO) standard 1250 VA (SPST-NO) standard 90 W (SPDT) 750 VA (SPDT) Max. switched current: 5 A AC SPST-NO standard 5 A DC SPST-NO standard 3 A AC/DC SPST-NO sensitive 3 A AC/DC SPDT Max. switched voltage: 150* VDC or 380 VAC
*Note: If switching voltage is greater than 30 VDC, special
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 106 1 x 105 at 5 A 240 VAC Res. 8 ms at nominal coil voltage 4 ms at nominal coil voltage (with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Surge Voltage Coil to contact Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. 10,000V (at 1.2x50 s) 1000 megohms min. at 20C 500 VDC 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -40C (-40F) to 90C (194F), standard -40C (-40F) to 105C (221F), sensitive -40C (-40F) to 130C (266F) 0.062" DA at 10-55 Hz 10 g operating, 100 g damage P.B.T. polyester Tinned copper alloy, P. C. 270C (518F) 5 seconds 80C (176F) 30 seconds 4.6 grams
precautions must be taken. Please contact the factory.
Rated Load UL, CUR
Form A (N.O.) 5 A at 250 VAC, Res., 100k cycles 5 A at 30 VDC, Res., 100k cycles 1/8 HP, 125 / 250 VAC, 100k cycles 3 A at 250 VAC, 0.4 PF., 100k cycles C300 Pilot Duty, 125 / 250 VAC, 100k cycles TV-2, 120 VAC Form C 3 A at 250 VAC, Res. 100k cycles 3 A at 30 VDC, Res, 100k cycles Form A and Form C 5 A at 250 VAC, 100k cycles Silver nickel, gold plating available <100 milliohms initially (24 V, 1 A voltage drop method)
VDE Material Resistance
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 253 mW standard 113 mW sensitive 1.25 W at 20C (68F) ambient 41C (74F) at nominal coil voltage, standard 22C (40F) at nominal coil voltage, sensitive Max. 130C (266F)
Max. Immersion Time Weight
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.
10/31/08W
AZ AZ770
RELAY ORDERING DATA
STANDARD RELAYS - TYPE 1 FOOTPRINT COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 18 24 48 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 36.0 Max. Continuous VDC 3.9 6.5 7.8 11.7 15.6 23.4 31.2 62.4 Coil Resistance 20 10% 55 10% 80 10% 180 10% 320 10% 720 10% 1,280 10% 5120 15%
ORDER NUMBER*
Form A (SPST) AZ770-1A-3D AZ770-1A-5D AZ770-1A-6D AZ770-1A-9D AZ770-1A-12D AZ770-1A-18D AZ770-1A-24D AZ770-1A-48D Form C (SPDT) AZ770-1C-3D AZ770-1C-5D AZ770-1C-6D AZ770-1C-9D AZ770-1C-12D AZ770-1C-18D AZ770-1C-24D AZ770-1C-48D
SENSITIVE RELAYS - TYPE 1 FOOTPRINT COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 9 12 18 24 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 Max. Continuous VDC 5.1 8.5 10.2 15.3 20.4 30.6 40.8 Coil Resistance 45 10% 125 10% 180 10% 400 10% 720 10% 1600 10% 2800 10%
ORDER NUMBER*
Form A (SPST) AZ770-1A-3DS AZ770-1A-5DS AZ770-1A-6DS AZ770-1A-9DS AZ770-1A-12DS AZ770-1A-18DS AZ770-1A-24DS
*Add suffix "E" for epoxy sealed version. Add suffix "K" for Type 2 footprint. Add suffix "G" for gold plated contacts. Add "H" after AZ770 for high temperature version ( sensitive only ). Add "T" after AZ770 for high current version ( sensitive only).
MECHANICAL DATA
.703 Max [17.85] .407 Max [10.35]
PCB layout
.494 Max [12.55]
5-.05 [O1.3] .60 [15.24] 5-.05 [O1.3] .50 [12.7] .1 [2.54]
.157 [4] D .02 [0.5] 2-.012 [0.3]
.016 [0.4] .03 [0.8]
.30 [7.6]
.25 [6.35]
.30 [7.6]
*
.157 [4] .06 [1.5]
*
Type 1
Type 1
VIEWED TOWARD TERMINALS
Type 2
*Not used on Form A version
.703 Max [17.85]
.407 Max [10.35]
Wiring diagram
3 3
.494 Max [12.55]
2
.157 [4] D .02 [0.5] 3-.012 [0.3]
5
4
2
5
4
* Type 1 Type 2
VIEWED TOWARD TERMINALS
*
.016 [0.4] .03 [0.8]
Type 2
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
*Not used on Form A version
10/31/08W

▲Up To Search▲

Price & Availability of AZ770-1A-12D

	To Download AZ770-1A-12D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .